Online Keystone & Image Adjustment Form
Type of Image Adjustment
Please choose one of the three options by selecting your corresponding graphic, then select the "Next" button to move forward to walk through the measurements needed for your image to be adjusted. Please Note: Each image that you need adjusted will need a form completed.
Tell us about your image.
Which of the four selections below matches the general shape of your artwork? For example, if your art is a text logo read from left to right, then a rectangle would match best. If you are using a breakup or clouds and filling the image area, then a circle would match best. Please select one. Then select the "Next" button to move forward.
Distance to Image Center
Enter distance from fixture to image center.
Projection Surface
What surface is your projected image hitting? The Wall, Floor, or Ceiling? Please choose the image below that matches your venue. Then select the "Next" button to move forward.
Position of Fixture in Relation to Image Center
Please select the Apollo Logo that best matches the position of your fixture in relation to your image.Note: View is from behind fixture. After position is selected select the "Next" button to move forward.
Lens Degree
The lens degree, also known as the barrel or beam angle, is used to calculate the standard projection size of your image. Sizes for independent lens usually range from 5°, 10°, 14°, 19°, 26°, 36°, 50°. The alternative is a Zoom Lens. This lens usually has a range of 10° - 60°. Please select your Lens Type and enter either your degree for Standard Lens Type or the full range of degrees for Zoom Lens Type in the field. Then select the "Next" button to move forward.
Projection Size
Please enter the final size you like your image to be. Enter a maximum height or width by selecting Wide or Tall from the dropdown beside the projection size input. Then select the "Next" button to move forward.